How long string tennis racquet

With the string you just pulled tension with, secure it in place with a second clamp as close to the grommet as possible. Release the string from the gripper and repeat the process for the other side of the string. Insert the string into the gripper, pull until the correct tension is reached, clamp it in place, repeat the process on the opposite string, and continue until all your mains are finished.

NOTE: When stringing, you should never go more than three mains ahead of the opposite side as to avoid uneven pressure on the racquet frame. Also look out for holes that are skipped or shared. Usually you can tell the difference by a dot on the frame indicating that the hole is skipped.

Once the mains are finished, you can now tie the knots. With your clamps still properly secured, insert an end of the string into the nearest possible hole with space on the outside of your frame and pull the string inside. You might need to use an awl to accomplish this. To tie the knot, bring the end of the string down one side of the main string and up the other, going through the loop you just created.

You can use your pliers or insert the end of the string into the gripper to tighten it, and repeat the process again for a strong double knot. Once the knots are secure, you can release the clamps and cut the extra string on both sides, taking care not to cut the knots.

Step 7. Begin the Cross Strings. The main strings are now finished so we can move on to the cross strings. Going for the best bang for your buck option is always great for your game and wallet. The Head Hawk strings are a tried and tested cheaper monofilament. After that, it is great to play and a joy to hit shots with. Strings that are extremely cheap are more often than not very bad to play with.

Cheaper synthetic strings get stiff very easily and they will break in under a week, especially if you are a player who hits a lot of topspin. When you are a beginner the string should be pretty much the least of your worries.

It should easily last you months because beginners are still developing their game. They are learning how to hit the ball consistently rather than including topspin and other more complex mechanics into it. If you are on a tight budget, then you should see this string saving guide , it goes over the precautions you can take to prolong the life of your tennis strings. But if you have a lot of money lying around then you can get your racquet strung as much as you want, whenever you want. A good rule of thumb to follow for a lot of players, even players on the pro tour is to change your strings whenever they break.

On average, most people should be able to string a tennis racket in about 30 minutes while maintaining complete focus and still paying attention to detail, 30 minutes to string a squash racket and 45 minutes to string a badminton racket. We found these average numbers by our own stringing experience and teaching others. In addition, I would like to mention that are probably stringers who claim that they can string significantly faster, however, we found that in practice speedy stringing jobs normally correlate with sloppy stringing and will result in more friction burn or crossover mistakes at the outside of the frame and grommets.

Of course, with practice you can definitely increase your stringing speed while still maintaining an overall level of quality. Of course, by speeding up your stringing you might risk some common pitfalls but we will discuss these and how to prevent them in an another post. There are definitely some points to look at when thinking of increasing your stringing speed.

Surely working at the big tours will make you work a bit faster, right? Of course! In this article by CNBC they took a quick tour behind the scenes at the US Open and got the answer: pro tour stringers will string a racket in about 15 minutes.

Stringing itself takes about 11 minutes, they claim, but everything together another 4 minutes or so. Take a look at this great Wimbledon video of a couple of years ago with some official tournament times. So, how about badminton? Well, not that fast but still… really fast. Check out this crazy video by Walter Mak. First of all, make sure you have serviced your machine properly.

You might wonder why this poses a question at all as you may have bought all your strings in your local shop and considered they probably should always be delivered with enough string. And maybe you wish to do so in the future.

However, did you know you could actually save quite a bit of money if you are prepared to buy your strings in bulk? This string costs And a total save of more than euro! Not bad for a quick calculation…. Then I would definitely advise you to keep buying sets for now while your still in the experimenting phase.

Finally, from experience I know that reels of string can dry out in the course of time, especially if you happen to put the reels in warm and sunny storage space. This can in the end cause premature breakage of strings, even while stringing. I think you should try using all of your stock within a season or two or three. On the other hand, are you a true string breaker?

A power player? A true combination of Andy Roddick and Rafael Nadal? Have you actually tested quite a few strings and are you confident with your current set up? Than it would be crazy for you not to be buying strings from a reel!